Sunday, February 21, 2010

A Few Tips to Remember about Garage Repairs

Posted by: Denver Garage Repairs

Garage door repair is often just a matter of maintenance. To prevent problems, routinely check your rollers and cables. Make sure there's nothing loose. Everything should be tight, and nothing should move too much. Alignment is another thing to check. It is important to see that it moves smoothly on the track before you move on.  At this point, if there is a problem, it's usually visible to the naked eye. If you're not sure whether it's aligned right or not, you can always bust out the owner's manual and double check.


The majority of such Denver garage repair problems are caused by maintenance issues. If it's not moving the way it's supposed to (or not moving at all!), check the tracks and alignment first. A simple adjustment here might just fix the problem. Whenever doing any repair work, the one thing you need to keep your eye on always is the springs. The springs are under an incredible amount of tension. If they break for any reason, they'll whip the heck out of anything in their path. If that anything is you, you're going to be in a world of pain.
Some models have safety cables to keep the springs in place even if they break. If you don't have these, it might be a good investment for your safety. Make sure whenever doing any work at all that the springs are in place and in no danger of coming off. You probably know this, but it's always a good thing to keep in mind: The door is one heavy piece of house. Most doors weigh 400 pounds or more, and if you've got wooden doors, it will definitely be more. If that thing comes slamming down on any part of your body, it's going to really hurt in the morning/

Every door these days has a safety switch that knows when to stop. But, when doing work in there, you might have the box turned off. That means your safety will be turned off too. In this case, be extra careful that the door stays shut if possible. This repair isn't hard to do by yourself. Keep these things in mind while you're working, and you shouldn't have any problems. Only call a professional when things get out of your control.
In FL garage door repair services are provided by certified technicians who are thoroughly trained to know your system, to work fast and to get the job done right the first time. To know more, visit http://garagedoorsfl.com/
Article Source: http://EzineArticles.com/?expert=Andrew_Stratton

Denver Garage Door Repair Service

Posted by: Denver Garage Repairs

Having a solidly working garage door is definitely a must. You wouldn't want to have problems with your Denver garage door because they will cause so much added problems to your life. That is why hiring nothing but professionals for some repair and maintenance jobs should be the best course of action. You may start to hear noises coming from the door hardware or mechanism; these noises are always a great sign of your door needing some maintenance and garage repair jobs done.

Finding a professional repair services in Denver is definitely not a difficult task to complete. All you have to do is find a reliable service provider near you and you are all set. The cost of these types of maintenance and repairs shouldn't even be that much. Garage door hardware is simply too delicate to handle on your own, and you may get injured in the process if you don't know exactly what you are doing. Professionals deal with common door issues on a daily basis, so you can rest assured knowing that the problems you are having will be solved in no time at all.

If you want to do your own part of door maintenance, simply have a penetrating solvent and quality lubricants in hand. On a slow weekend, take your time to look into the matter, spray some penetrating solvents on areas such as rollers, roller tracks, hinges, and latches, and then add lubricants to bearings and rollers. Most of the time it will keep your door working superbly, although some further repairs may be needed if the problems persist.

Luckily, available repair and maintenance service providers are commonly offering warranties for their works. You wouldn't have to worry about having other problems with the garage door in the near future because the warranty covers them all. That is exactly why getting a reliable service provider near you essential; you can simply contact them for maintenance and repair jobs and they will be there to assist you in a matter of minutes. The services are well worth spending money for, so contact the right service provider now.

Garage Door Safety Tips and Tricks

Posted by: Denver Garage Repairs

So you have the right garage door hardware installed; the next thing you need to learn is safety tips. There are more than just one thing that can go wrong with doors, and it would be best to prevent such bad things from happening. Even the latest state of the art garage doors have hazard warnings on the package to make sure you don't experience troubles in the future.

There are several built-in features that will make your door a lot safer. Features such as reversing mechanism and safety beam can help you keep loved ones or precious objects from getting crushed under the door. It would be best to inspect these safety features regularly and see if they are working properly. Use a rather soft material such as rolls of paper towel and place it on the door's track to see if the sensors are working properly. You may need to adjust the sensitivity every once in a while, so call professional service providers to help you.

Regular inspections may also be required. Parts such as springs, wires, hinges, rollers, and bearings are all consumables and will be expiring after certain degree of usages. Make sure you get people who know exactly what they are doing for the inspection, since these parts are actually very crucial and must be replaced occasionally.

Always study the door's manual and see if you can find emergency override steps. You wouldn't know when unwanted things, often simple things such as power outages or more complicated events such as having something (or someone) stuck under the door, may happen; prepare yourself for the emergency override.

If you have children in the house, make sure you keep the door's remote control away from their reach. If they are playing near the garage you must left the door open or closed completely. Some parents I know make the mistake of opening their doors halfway for unknown reasons; this is actually very dangerous, because the door can slip from its railings at anytime.

Just follow the safety manual that comes with your door hardware, and you should be able to operate the door safely at all times.

For more information about garage door hardware, visit My garage door hardware, the premier online resource. They provide tons of information and resources to door replacement, repair and installation your door, and garage door hardware resources as well.
Article Source: http://EzineArticles.com/?expert=Alice_Douglas

Monday, February 15, 2010

How to fix a balky garage-door opener?

By Al Heavens
Question: I have a problem with my automatic garage door and I am hoping you can help me. The garage door is about three years old and I've not had a problem with it until recently.

I am able to open the door using the keypad mounted on the outside, the remote-control automatic garage door openers, and the indoor wall-mounted control. I cannot close the door using the automatic garage-door opener or the keypad. The only way I can close the door is to press and hold down the indoor wall-mounted control. If I release it before the door is completely closed, it stops in mid-descent.

It's creating a big inconvenience, because we have to close the garage door from the inside, then exit the front door when leaving home. I can no longer get in my car, press a button, and go on my merry way.

How can we fix the problem?

Answer: You said your opener was manufactured by Chamberlain in Elmhurst, Ill. The manufacturer's tech staff explains that before the garage door can close properly, the safety reversing sensor must be connected and aligned correctly. An obstruction in the path of the sensor also will prevent the door from closing.

If the safety sensors are not installed, or are misaligned or miswired, or you have shorted a wire at a staple point, the door will not close by the remote control or momentary contact at the wall push button. The door will attempt to close but will reverse, and the lightbulb on the opener will flash 10 times. You can, however, apply constant pressure to the wall push button until the garage door is fully closed.

This sensor is an electronic beam that is sent between two sending and receiving "eyes." These eyes face each other and are located just inside your garage door. They may need to be adjusted so the beam from the sending eye is properly detected by the receiving eye. Once the receiving eye "sees" the beam from the sending eye, a green indicator light will glow on the top of the eye.

Check each sensor for a steady glowing indicator light. If both indicator lights are on, or if one indicator light is flickering, the sensor may be slightly misaligned.

To check for misalignment, obstruct the beam of the sensors so they cannot see each other. When the beam is blocked, the indicator light on one of the two sensors will temporarily go out. This is the receiving sensor. Remove the obstruction and loosen the wingnut on the receiving sensor.

Adjust the receiving sensor until the indicator light is bright and steady, then retighten the wingnut. This usually takes a couple of attempts before it is back in alignment.

If all else fails, contact the tech support staff at Chamberlain at 1-800-528-5880 about garage door opener repair, and the folks there will walk you through the problem.

Denver Garage Repairs



Posted by: Garage Repairs Denver

Roll-up garage doors have tracks that curve from vertical to horizontal; both parts must be aligned.
There are two main components to a garage door: the door itself and the opener. In this article, we'll tell you how to make repairs to both things. We'll start with the actual door.

Repairing a Garage Door

Overhead garage doors, whether they roll up in sections or swing up in one piece, operate on spring tension. The door moves on metal tracks on the garage walls, and a heavy spring or springs provide the power. In most cases when the door doesn't work easily, Denver garage repairs are fairly simple. Here are some helpful repair tips:

Step 1:
Check the metal tracks inside the garage. Look at the mounting brackets that hold the tracks to the walls. If they're loose, tighten the bolts or screws at the brackets. Working inside the garage with the garage door closed, examine the tracks for dents, crimps, or flat spots. If there are any damaged spots, pound them out with a rubber mallet, or with a hammer and a block of scrap wood. If the tracks are badly damaged, they should be replaced.

Step 2: Check the tracks with a level to make sure they're properly aligned. Horizontal tracks should slant slightly down toward the back of the garage; with roll-up doors, the vertical sections of track should be exactly plumb. Both tracks must be at the same height on the garage walls. If the tracks are not properly aligned, loosen but do not remove the screws or bolts that hold the mounting brackets, and tap the tracks carefully into position. Recheck the tracks with the level to make sure they're in the right position; then tighten the screws or bolts at the mounting brackets.

Step 3: Clean the tracks with concentrated household cleaner to remove dirt and hardened grease. Clean the rollers thoroughly, and wipe both tracks and rollers dry of the garage door.


Step 4: Lubricate both the tracks and the rollers using garage door lubricant spray or powdered graphite in the tracks, and household oil or silicone spray on the rollers. If there are any pulleys, lubricate them with the same lubricant you used on the rollers.
Step 5: Check for loose hardware, and tighten as needed. On swing-up doors, check the plates where the spring is mounted to be sure the screws are tight, and tighten any loose screws. On roll-up doors, check the hinges that hold the sections of the door together; tighten any loose screws, and replace any damaged hinges. Sagging at one side of the door can often be corrected by servicing the hinges. If a screw hole is enlarged, replace the screw with a longer one of the same diameter, and use a hollow fiber plug, dipped in carpenters' glue, with the new screw. If the wood is cracked at a hinge, remove the hinge and fill the cracks and the screw holes with wood filler. Let the filler dry and then replace the hinge. If possible, move the hinge onto solid wood.

Swing-up garage doors move on horizontal tracks. T
©2006 Publications International, Ltd.
Swing-up garage doors move on horizontal tracks. The power spring is mounted
on the door frame and hooked to the door.


Step 6: Check the springs. On swing-up doors, the spring on each side is hooked into holes or notches. To adjust the tension, move the spring hook to the next hole or notch. On roll-up doors, the spring on each side is controlled by a spring cable on a pulley. To adjust the tension of this type of spring, pull the cable farther through the plate above the door, and reknot the end to maintain the tension. Caution: If a roll-up door has only one torsion spring, at the center of the door, do not try to repair it. The tension is so great that the spring could injure you. For doors with this type of spring, call a professional repair service.

Sometimes the problem with your garage door can be traced to the opener. In the following section, we'll show you how to replace a garage door opener.

Article Source: http://home.howstuffworks.com 

Wednesday, February 10, 2010

Garage Door Repairs

Having a solidly working Denver garage door is surely an absolute must. You would not need to have Problems with your garage door because they are going to cause so much added issues to your life. That's why hiring nothing apart from executives for some repair and maintenance jobs should be the best course of action. You will start to hear noises coming from the door hardware or mechanism ; these noises are often a great sign of your door needing some upkeep and correct jobs done.

Finding a Denver garage repair services is certainly not a difficult job to finish. All you've got to do is find a trustworthy service supplier near you and you are all set. The price of these types of upkeep and repairs should not even be that much. Garage door hardware is just too delicate to handle on your own, and you'll get injured in the midst if you do not know precisely what you are doing. Executives deal with common door issues on a day-to-day basis, so you can rest assured realizing that the Problems you are having will be deciphered in virtually no time in any way.

If you want to do your own part of door maintenance, simply have a penetrating solvent and quality lubricants in hand. On a slow weekend, take some time to investigate the matter, spray some penetrating solvents on areas like rollers, roller tracks, hinges, and latches, and then add lubricants to bearings and rollers. Most of the time it will keep your door working superbly, though some further garage repairs may be needed if the Problems endure.

Luckily, Denver garage repair service providers are usually offering guaranties for their works. You wouldn't have to worry about having other issues with the door in the future because the guaranty covers them all. That is exactly why getting a reliable service provider near you necessary ; you can simply contact them for maintenance and fix jobs and they're going to be there to help you in a matter of mins. The services are definitely worth spending money for, so contact the right service supplier now.

Monday, February 1, 2010

Leaving Garage Repairs to Experts

Unless you have driven your vehicle thru a closed door, there's a good possibility that it will last for a few years before any garage door correct is needed. Provided it's been maintained correctly to stop weather damage, except for an automated door opener, there are only a few parts that will need replaced. When a Denver garage door correction is necessary, it may be wise to contact an experience fix company to affect the fix.

Guide wheels and tracks are simple enough to replace but unless you know what you do, replacing springs can be dangerous. One of the most common Denver garage repair roles is the replacement of the tension springs that help in the manual or automated opening and closing of the door. The springs take the majority of the weight off the door making it simpler to open by hand as well as helping the opener motor do its job.

Extension springs are the most simple and safest for the home-owner to switch all alone, as they often involve the need for a little understanding on how they work to affect the garage door repair. On the other hand, torsion springs, coiled at the top of the door, are under plenty of stress and tension and can be deadly for an inexperienced person to try and replace or repair them.

If the garage door fix involves changing torsion springs, it is maybe smart to let somebody who can say what they are doing make this repair. In addition, some firms won't sell torsion springs direct to customers thanks to the risks concerned in replacing them.

Other Repairs Can Be Much simpler

If the garage door fix does not involve springs, there is a good chance the home owner can affect these repairs all alone. The lift bracket fixed to the base of the door as an example, is another piece of garage door hardware that regularly goes bad due typically to its position at the bottom of the door.

Snow and rain often amasses near the bottom and can cause rust to eat away at this plate to which one end of the door's cable is attached. Performing this garage repair Denver can be as simple as removing the old plate, generally held in position by four bolts, and replacing it. the wood at which the plate attaches may also have to get replaced as part of this garage door repair.

Denver Garage Door Repairs

The entire idea of a garage is to aid in guarding the investment you have made in your automobile. So, what do you do when the garage door goes on the fritz? You cannot let it go and hinder you from being able to securely store your car. For Denver Garage repairs you can simply find a correct service. Without regard for if it is a bad motor or slipped track, there is a company to mend it.
Obviously, there are reasons folks treat their automobiles so well. They need it last for many years and also stay trustworthy. That bright, glossy exterior will not stay so good looking if it has to sit out in the weather. You might end up with faded paint or damaging rust. There is a reason garages were invented. A while without garage door repairs could create more expensive issues.

A more horrifying thought would be a vandal visiting your auto, while it was parked outside. Someone could scratch it, making it look nasty. Even the employment of shaving cream and toilet paper may cause damage and be tough to clean up. Picture coming out to find all your tires slashed. You know how much they cost.
Thieves like to find cars left alone outside. The fancier the vehicle, the more they need it. You might end up having to address explaining burglary to your insurance company. Do not forget about calling the police to make a dispatch, or they will not cover it. All this is one hassle after another and lengthy. A garage helps keep your car safe and secure.

Any one of these will make you wish you had known who to call to get that door fixed fast. As if these troubles are not enough, the garage is also usually another entry into your home. A broken door could let a burglar gain simple access and make your losses even bigger.

If you like to provide business for the small man, you could call G and L Garage Doors. G and L has been a reliable supplier of Garage Door Repairs for a number of years in the metro area. They fix broken garage doors as well as Denver garage door installation.
With this number of selections, there's no discomfort in finding Denver Garage Door repair services. Without regard for what caused the difficulty, you can get it set right, again. If you'd like to discover more about Denver Garage Door, then visit G & L Garage Door's site on the easy way to choose the best correct or installation option for your needs.